Polymercolored anti-slipfloor paint
Applications:
Suitable for bus lanes, sidewalks, non-motorized lanes,tunnels,highway speed bumps, flyovers, bus harbor, long downhill slopes, sharp curves, toll station access roads, and highway emergency stop areas.
Coating properties:
Paint curing time is fast, construction operation issimple, low odor
Excellent water resistance, good flexibility
Excellent resistance to chemical corrosion
Good temperature resistance and high slip resistance
Excellent interlayer adhesion, high bonding strength with concrete base.
Why you should choose Polymercolored anti-slipfloor paint
| Pilot projects | unit | index | |
|---|---|---|---|
| Dry | Actual Dry | h | ≤4 |
| Time(25℃ ) | Actual Dry | h | ≤6 |
| Pencil hardness | – | ≥2H | |
| Wear resistance (750g/500r) | g | ≤0.02 | |
| Adhesion(grid method) | level | Pass | |
| Weathering resistance( 800 hours） | / | No significant change | |
| Resistant to 3% salt water | 7 days | No significant change | |
| Water resistance | 7 days | No significant change | |
| Resistant to 20% sodium hydroxide | 7 days | No significant change | |
| Resistant to Gasoline 120# | 7 days | No significant change | |
| Construction method | Auxiliary material | Reference dosage | |
|---|---|---|---|
| Plain land | Trowel-coated polymer colored road anti-slip primer | / | 1-2(12-16mesh) |
| Primer coat | 1.Repair and sand it, thenclean the floor. 2.Apply the sealer and colored primer | / | 2-2.5kg/m² 0.5-0.75kg/m² |
| Ceramic particle layer | Scrape waterborne epoxy midcoat | Quartz sand | 2-2.5kg/m² |
| Topcoat | After 2-3 hours of complete coverage of the surface with particles, clean the surface of excess particles. | Particles | 3-5kg/m² |