Solvent-free primer
Applications:
It is mainly used in heavy corrosion protection fields such as urban pipeline anti-corrosion, internal and external corrosion protection of buried pipelines, patching, elbows, and anti-corrosion overhaul of buried pipelines.
Coating properties:
low odour, low VOC, high hardness, acid and alkali resistance
High hardness, up to 2H
Color stability: No color separation occurs during
Comnstruction good leveling: no roll marks, no brush marks
With low cost advantage, suitable for all kinds of ground
Why you should choose Solvent-free primer
| Pilot projects | unit | index | |
|---|---|---|---|
| Dry | Actual Dry | h | ≤4 |
| Time(25℃ ) | Actual Dry | h | ≤24 |
| Hardness(Shore D) | – | ≥90 | |
| Impact resistance (500g steel ball) | g.cm | Pass | |
| Wear resistance (750g/500r) | g | ≤0.02 | |
| Adhesion(Grid method) | level | 1 | |
| Water resistance | 7 days | No significant changes | |
| Resistant to 20% sulphuric acid | 7 days | No significant changes | |
| Resistant to 20% sodium hydroxide | 7 days | No significant changes | |
| Resistant to petrol120# | 7 days | No significant changes | |
| Bonding strength | Mpa | ≥3.2 | |
| Compressive strength | Mpa | ≥70 | |
| Construction method |
|---|
| 1. Construction base surface requirements: sanding, sweeping to clean, repair; |
| 2. If the humidity of the basic surface is >18%, the construction must be stopped, and the construction can only be carried out when the humidity of the surface is <18%, otherwise it will be easy to blister; |
| 3. Operation requirements: before construction, the A material should be fully mixed, add the component B material according to the proportion, mixing for about 3 minutes, and then use the roller to apply or scrape with a flat scraper to get a smooth and even surface coating; |
| 4. Use time limit:when the product in ≈ 25 °, it can be used for about 45 minutes, please determine the amount of ingredients each time according to the actual construction progress. The prepared materials must be used up at one time, and the remaining materials A and B must be sealed and stored. |